Mechanical tests of samples of basalt and textile glass reinforcement were performed in the Klokner Institute within the solution of the research project GAČR 13-12676S and SGS14/171/OHK1/2T/31. These tests were carried out because of the need to establish elementary mechanical quantities that are tensile strength and modulus of elasticity of non-conventional reinforcement. Both of these quantities are required for further modeling of structures and for designing of the elements made from textile reinforced concrete (TRC) as not being provided by reinforcement manufacturers. The tests were carried out on a total of 12 samples of reinforcement where the first 6 samples were made from textile glass reinforcement (AR-G = Alkali-Resistant Glass) and the remaining 6 samples were prepared from basalt reinforcement. The filament sheaf fibers called roving was used for the production of test specimens. The sample of the textile glass reinforcement was produced by the V. FRAAS, GmbH, Germany and the sample of basalt reinforcement was supplied by the BASALTEX, a. s. firm.